Common Mistakes When Selecting Well Water Treatment Systems

  1. Water Treatment System

Choosing a well water filtration system for your well is an important step in ensuring your home has the best water supply possible. However, some common mistakes are often made in the process. When trying to find water filtration CT respects and trusts, a number of mistakes can be made.

These common errors include (but are not limited to):

  • Not analyzing the well water chemistry properly
  • Not understanding how your well water system works
  • Not checking the water pressure
  • Not knowing the flow rate of the well pump
  • Choosing the wrong treatment for the problem

It’s imperative to avoid these mistakes when selecting a Connecticut well water treatment system. Not doing so can result in selecting the wrong one, which can in turn lead to system malfunctions and poor water quality.

Water Chemistry is Key

There is a specific range that most water treatment systems work well in. For example, well water is naturally acidic, but it also tends to contain iron. Many iron filtration systems can’t remove iron if water is acidic, so the first step in this case is addressing the water’s acidity.

Knowing the baseline state of your water is key to having it treated effectively and knowing which steps to take. A water source located near an agricultural area, a gas station, or an industrial site will require different treatment steps. A thorough water analysis is vital prior to selecting a new water filtration system.

Understanding How Your Well Works

Most well pump water uses a submersible pump but for shallow wells, a jet pump may be used. This is located at ground level and draws water into the household. Some systems have a holding tank to house the water before it’s pumped into the home. Other well water systems are gravity fed. With a pressure tank, the water treatment system should be installed after the tank, not before, or the well pump could be damaged.

Well Pump Flow Rate

Pump flow rate is an important factor in wells and water treatment systems. The well pump should be tested to help determine actual flow rate from the pump. This allows the correct water treatment system size to be determined and selected.

Most systems are self-cleaning and require a minimum flow rate in terms of gallons per minute to function properly. It is crucial to know the water pressure level from the well pump as well as the pressure system. This pressure should be optimized for the best results.

Partner With An Expert Well Water Company in CT

It’s important to remember not all water treatment systems address all pollutants and contaminants. The well water system you choose should be verified as effective for the impurities common to your water supply. It should also be ideal for the flow rate and water pressure level it will be processing.

When considering what water filter system to select for your property, consider working with a well company CT knows and trusts. At Greco and Haines, we offer water filtration CT can count on. We can also provide water softener system service, well water quality testing, well drilling in CT, well pump repair, whole house water filter service, and reverse osmosis water treatment if required. Contact us today to get started!